Panasonic FZ-A3 Serie Bedienungsanleitung Seite 11

Declaration of Conformity (DoC)
Hereby, Panasonic declares that the radio equipment type FZ-A3
(Model No. FZ-A3AE, FZ-A3AG) is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
http://www.ptc.panasonic.eu
Contact to Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Maximum radio-frequency power transmitted in the frequency
bands
Frequency band
Wi-Fi 2.4 TX/RX 2412 MHz - 2472 MHz
GHz
Wi-Fi 5 TX/RX 5180 MHz - 5700 MHz
GHz
Bluetooth TX/RX 2402 MHz - 2480 MHz
NFC TX/RX 13.56 MHz
GNSS RX L1 1575.42 MHz (GPS),
1598.0625 MHz - 1605.375
MHz (GLONASS),
1575.42 MHz (Galileo),
1561.098 MHz (Beidou)
WCDMA TX 1922.4 MHz - 1977.6 MHz,
*1
FDD I RX 2112.4 MHz - 2167.6 MHz
WCDMA TX 1712.4 MHz - 1782.6 MHz,
*1
FDD III RX 1807.4 MHz - 1877.6 MHz
WCDMA
FDD VIII
LTE Band
1
LTE Band
3
LTE Band
7
Maximum transmit
LTE Band
power
8
17.5 dBm (e.i.r.p.)
LTE Band
(ANT0 + ANT1)
20
17.0 dBm (e.i.r.p.)
*1 For models supporting cellular transmission
(ANT0 + ANT1)
Interface cable
7.2 dBm (e.i.r.p.)
• Use of an interface cable longer than 1.8 m is not recommended.
-15.45 dBuA/m
at 10 m
-
Ecodesign information
Ecodesign information under EU Regulation (EC) No.1275/2008
amended by (EU) Regulation No.801/2013. From 1 January 2015.
please visit here: www.ptc.panasonic.eu
23.0 dBm (Power
click [Downloads] → Energy related products information (Public)
class 3)
23.0 dBm (Power
1) The power consumption in networked standby and guidance are
class 3)
mentioned in the web site above.
Frequency band
TX 882.4 MHz - 912.6 MHz,
*1
RX 927.4 MHz - 957.6 MHz
TX 1922.5 MHz - 1977.5 MHz,
*1
RX 2112.5 MHz - 2167.5 MHz
TX 1710.7 MHz - 1784.3 MHz,
*1
RX 1805.7 MHz - 1879.3 MHz
TX 2502.5 MHz - 2567.5 MHz,
*1
RX 2622.5 MHz - 2687.5 MHz
TX 880.7 MHz - 914.3 MHz,
*1
RX 925.7 MHz - 959.3 MHz
TX 834.5 MHz - 859.5 MHz,
*1
RX 793.5 MHz - 818.5 MHz
To ensure compliance to the EMC regulations, shielded cables
shall be used.
Maximum transmit
power
23.0 dBm (Power
class 3)
23.0 dBm (Power
class 3)
23.0 dBm (Power
class 3)
22.0 dBm (Power
class 3)
23.0 dBm (Power
class 3)
23.0 dBm (Power
class 3)
Regulatory Information (English) 11