Installing Batteries - LG MR20GA Benutzerhandbuch

BATTERY

1. Installing Batteries

ꔈ Please read this manual carefully.
ꔈ Press the top of the battery cover, slide it back, and lift the cover as shown below.
ꔈ To replace batteries, open the battery cover, replace alkaline batteries (1.5 V, AA)
matching and ends to the label inside the compartment, and close the battery
cover. Be sure to point the remote control at the remote control sensor on the TV.
ꔈ To remove the batteries, perform the installation actions in reverse. Don't mix old or
used batteries with new ones. Close the cover securely.
ꔈ Open the battery cover to find the label.
2. Precautions
ꔈ After replacement of the batteries, pair the remote control and use it in accordance with user manual.
ꔈ If the unit does not operate after replacement of batteries, reattempt pairing in accordance with the user manual.
ꔈ If the remote controller is not being used for prolonged period of time, remove the batteries from the unit.
ꔈ Do not dismantle or expose the batteries to heat.
ꔈ Do not drop or exert extreme impact on the batteries. This may cause the case to be damaged.
ꔈ Do not immerse the batteries in water.
ꔈ There is danger of explosion if batteries are inserted incorrectly.
ꔈ Properly dispose of used batteries.
ꔈ Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution.
3