UPC Cablecom DigiCard Installation Seite 24

Manual DigiCard
4. Insert the DigiCard
Insert the DigiCard in the slot at the rear of your TV set.
Push the DigiCard into the slot until you feel it click into place.
!

! The authentication process (registration with upc cablecom)
is launched automatically. Wait until the authentication process
is complete. This process may take several minutes.
5. Check the installation
Check the installation by selecting one of the newly subscribed additional
channels. If the channel is broadcast, the installation was successful.
If you cannot receive any of the newly subscribed additional chan-
!
nels, remove the DigiCard from the TV set and repeat steps 1 to 5.
Ensure that the necessary data is entered correctly.
If you have any questions or doubts, please consult our website
upc-cablecom.ch/support
24
Downloaded from www.Manualslib.com
Rear of TV
manuals search engine

or
Rear of TV