Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.
All screws should be tight and free of corrosion.
The housing, the visible parts, the mounting supports and the
installation location (e.g. ceiling, suspension, trussing) should not be
deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections...
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a
qualified technician maintain the device.
If the protective glass is damaged, disconnect the lamp immediately
from the mains. Have it repaired immediately by a qualified technician.
Do not use the lamp with a cracked or broken protective glass.
This luminaire does not have a built-in device to disconnect it from the
electric mains. Make sure to electrically isolate the luminaire before
installation or maintenance activities are performed.
Wipe the device regularly with a moist, lint-free cloth. Do not use
alcohol or solvents.
There are no user-serviceable parts.
Contact your dealer for spare parts if necessary.
8.
body colour
electrical data
power LED module
total nominal power
nominal voltage
driver
nominal voltage
LED module
red
green
blue
power factor
energy
consumption
cable
light technical data
colour
colour temperature
beam angle
luminous intensity
V. 03 – 18/09/2017
Downloaded from
www.Manualslib.com
LEDA4011RGB/LEDA4012RGB
Cleaning and Maintenance
Technical Specifications
6x 3 W RGB SMD LED
manuals search engine
LEDA4011RGB
white
10 W
230 V~
2.0-2.2 V
3.0-3.2 V
3.0-3.2 V
10 kWh/1000 h
H05RN-F 3G1.0 - 30 cm
60 cd
7
LEDA4012RGB
14x 3 W RGB SMD LED
20 W
0.5
20 kWh/1000 h
RGB
N/A
110°
145 cd
©Velleman nv
Werbung
Inhaltsverzeichnis
