Operation; Switch Device On/Off - Klarstein Vinovilla 29 Built-In Duo Bedienungsanleitung

EN
28

OPERATION

Control panel and key functions

Switch device on/off

In standby mode, press and hold the button for 3 seconds to turn on the unit.
1
When the power is on, press the button, the unit will count down 3-2-1, then
turn off. While the unit is counting down, press and hold the button.
Setting the Upper Zone Temperature
2
Each time you press the button, the set temperature is reduced by 1 °C. As
soon as the minimum value is reached, the display returns to the highest value.
Upper Zone Display
3
Displays the temperature of the upper zone.
Lower Zone Display
4
Displays the temperature of the lower zone.
Setting the temperature of the lower zone
5
Each time you press the button, the set temperature is reduced by 1 °C. As
soon as the minimum value is reached, the display returns to the highest value.
Light and °C/°F conversion
When the light is switched on, briefly press the button to switch the light on or
off. Press and hold for 3 seconds to toggle between °C and °F display.
LED side light
6
• Press light button three seconds,the LED light will turn on. Press this button
three seconds again, the LED light will turn off.
• When the LED light turn on, press light button each time,the color of the
LED light will change cyclically.
• The LED light will turn off automaticlly after 2 hours.