ZyXEL V300 Serie Kurzanleitung Seite 16

5. Enter the information exactly as given to you by your VoIP service
provider.
If your VoIP service provider did not give you information to use for
any of the fields in this menu, leave them at their default settings.
The following table describes the fields in this menu.
FIELD
1 SIP1 Active
2 SIP1 Num
3 Serv Addr
4 Serv Port
5 Reg Addr
6 Reg Port
7 Domain
8 User ID
9 Password
16
DESCRIPTION
Select this to turn this SIP account on or off. When the SIP account
is not active, you cannot use it to make or receive calls.
This is your SIP account number. If you have a SIP account like
1234567@voip-provider.com, the SIP Number is 1234567.
This is the IP address of the server your VoIP service provider
uses for SIP calls.
This is the port on the SIP server used for SIP calls. The default is
5060.
This is the IP address of the server your VoIP service provider
uses to register the V300. If your VoIP service provider did not give
you a specific SIP register server address, enter the SIP Serv
address again.
This is the port the SIP register server uses to register the V300.
The default is 5060.
If you have a SIP account like 1234567@voip-provider.com,
the SIP service domain is voip-provider.com.
This is the user name for this SIP account.
This is the password for this SIP account.