ZyXEL V300 Serie Kurzanleitung Seite 14

Get an IP Address Automatically
The V300 is set to get an IP address automatically by default.
1. If you have neither a username and
password nor an IP address to use,
press 4 in the Adv Setting menu.
DHCP allows your V300 to get an
IP address automatically.
2. Press to access the menu.
3. If the screen displays Off, press
If the screen displays On, your
V300 is already set to get an IP
address automatically. You do not
need to change anything.
If DHCP is already set to ON, then you can choose another setting,
such as PPPoE or Static IP, to turn it off.
You have finished setting up your network connection. Now go to
Your Voice Account
14
(15).
4. Setting
4. DHCP(Off)
1. DHCP
Off
.
1. DHCP
On
Set Up