Medin Pediflow Handbuch Seite 9

®
Pediflow
2.2 Headgear, mask
The headgear is made of Nylon. The upper side has a Velcro closure for attaching the Pediflow
straps on the side are used for securing and they stabilize the mask position as well as the Pediflow
placed with their Velcro closures as desired on the straps of the headgear.
The mask is made of 100% silicone. There is additionally an attachment with loops for the straps of the headgear.
Materials
Usage
3. Assembly and use
Equipment needed:
To perform effective CPAP therapy with the Pediflow

A ventilation device or device which supports CPAP therapy

Pediflow

An appropriate tubing set with bent inspiration and expiration tubing. In addition, a chamber for the humidifier is
recommended. The connections to the tubing ends must have the F10 dimension to fit on the Pediflow

One headgear

Optional for ventilation devices which need external pressure measurement:
a T piece for measuring the pressure (already included in the medin
REF 4010)
Warning: Packaging
If the packaging is damaged or if the products themselves are damaged, these parts should not be used and should
be disposed of.
In addition, check the openings of the Pediflow
obstructed, the product affected should not be used.
Assembly:
(1) Check whether the Pediflow
(Figure 4).
(2) Connect the Pediflow
expiration tubing (Figure 3). If your ventilation
device requires external pressure measurement,
insert the T piece for pressure measurement in this
connection. The pressure measurement line can
then be inserted in this piece and connected with
the ventilation device.
(3) Seal the mask of the Pediflow
the CPAP parameters, for example, pressure, on
the ventilation device. If this is not possible, check
the tubing connections for leaks. If all connections
are correct and there is a defect of the Pediflow
should not be used and should be discarded.
Important note: Defective Pediflow
If the Pediflow
used.
Downloaded from www.Manualslib.com
Manual
Headgear
Nylon
Single-use product
®
(including mask)
®
is correctly assembled
®
to the inspiration and
®
by hand and adjust
®
®
does not work properly, it should not be
medin Medical Innovations GmbH  Adam-Geisler-Str. 1  D-82140 Olching
+49 8142-44846-0  www.medingmbh.com 
®
OP_Pediflow
manuals search engine
Masks
Silicone
Single-use product
®
, the following equipment is needed:
®
tubing or can be ordered separately
®
and the mask to ensure they are patent. If the openings are
®
Pediflow :
- Y piece
- Ball piece
®
, it
Holder
Figure 4: Assembled Pediflow
info@medingmbh.com
EN
®
and the mask. The
®
. These can be
®
.
Mask
®
6