Germa Kangoofix Bedienungsanleitung Seite 6

5. Step-by-Step Operating instructions
Below is a simplified step-by step procedure for deploying Kangoofix
1. Importantly first make sure you have the neck/back protection plate is inside the Inner Harness before use
2. Disconnect each of the 5 safety belt straps from the 5-point quick-release buckle.
3. Connect Kangoofix outer-harness shoulder straps, waist and upper leg belt straps by making loops around the trolley
4-point harnesses and upper leg harness.
4. Open up the inner harness, place the baby with his/her back towards the red part of inner-harness, making sure that
the baby is correctly supported by the neck/back support plate in the inner harness.
5. Start to close the inner harness around the child, starting with the flap between the legs and fix this part to one of the
shoulder flaps, using the attached hook fixing pads
Downloaded from www.Manualslib.com manuals search engine
6