Specifications - Germa Kangoofix Bedienungsanleitung

3. Specifications

The Germa Kangoofix conforms to standards ISO 6940:1984, SiS EN 1865, SiS EN 1789 and TSFS 2010:2
The Germa Kangoofix conforms to Council Directive 93/42/EEC, relating to Class 1 Medical Devices
Operating Temperature range: -35 °C to +70 °C
Parts/Materials
Inner harness, Warming cover and Skull-cap material: Breath-o-prene Oeko-Tex 100 (approved)
Belt set/outer harness: Polyester webbing
Buckles: Metal and plastic, approved for children car seat.
Dimensions
Germa Kangoofix Inner harness
Germa Kangoofix Warming cover + Skull-cap
Germa Kangoofix neck/back support plate
Germa Kangoofix outer harness
4. Deployment of Kangoofix
The Germa Kangoofix consists of an inner harness, warming cover and Skull-
cap, and a 5-point "outer-harness" safety restraint. The inner harness, warming
cover and Skull cap are all made of a material called Breath-o-pren Oeko-Tex
100, which is a multi-layer grey and red breathable fabric, clinically tested and
proven to cause no reaction to the baby's skin. A special hook fastening system
sewn into the material allows fixing of the inner harness and warming cover
around the child. The 5-point fixation restraint system is made from grey
polyester webbing, with approved crash-tested metal and plastic child seat
buckles.
When deploying Kangoofix, first ensure that the outer harness is attached to the trolley harness.
With the parent laid on the trolley with the backrest at a comfortable angle and the parent correctly and safely restrained
using the trolley 4-point harness and leg restraints, start to attach the Kangoofix outer-harness.
The 5 grey Kangoofix outer-harness straps should be attached to the trolley harness by feeding
each individual Kangoofix strap around the trolley harness strap and then back through the loop at
the end of the Kangoofix strap, and then pulled tight. A Kangoofix strap should be attached to each
of the trolley 4-point harness straps; around the shoulder straps each side of the patient and onto
the waist straps each side of the patient's waist, with the fifth Kangoofix strap attached to the
trolley upper-leg strap.
The Kangoofix inner harness and warming cover should then be wrapped around the baby, firstly ensuring that the
head/back support is correctly located inside the holding pouch of the inner-harness.
Wrap the inner harness around the baby, with the red side of the inner-harness against the baby's skin, the grey part
facing outwards, using the circular hook fixation pads to attach the inner harness together at the front. Start by fixing the
inner harness around the baby's legs, then around the shoulders. The inner harness should be deployed and adjusted
such that it is firmly held around the baby with no slack, but not too tight.
Make sure that the baby is correctly support by the neck/back support plate in the inner
harness.
Downloaded from www.Manualslib.com manuals search engine
Length (cm) Width (cm) Height (cm)
71 58 0,4
43 36 0,4
25 13 0,4
110 93 2,4
4
Weight (kg)
0,12
0,19
0,12
0,58