Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specification; Electrical Connection (U.k. Only) - DeLonghi Pinguino FX180 eco Betriebsanleitung

Vorschau ausblenden Andere Handbücher für Pinguino FX180 eco:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 48
FX180eco
RECOMMENDED OPE-
RATING CONDITIONS
Room temperature
Outside temperature
A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug should
B) If your appliance is not fitted with a plug, please follow the instructins provided below:
The wires in the mains lead are coloured in accordance with
the following code:
Downloaded from
www.Manualslib.com
16-05-2002
14:53
Pagina 33

Technical specification

ELECTRICAL CONNECTION (U.K. ONLY)

be cut off from the mains lead, and on appropriate plug fitted, as below. warning: Very carefully dispose of the cut off
plug after removing the fuse: do not insert in a 13 Amp socket elsewhere in the house as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-
on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In the
event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your nea-
rest electrical dealer. The colour of the correct replacement fuse cover is that as marked on the base of the plug.
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
Green and yellow Earth
Blue
Neutral
Brown
Live
manuals search engine
TECHNICAL SPECIFICATION
Power supply
Max. absorbed power
21 ÷ 32°C
in air conditioning
Max. absorbed power
21 ÷ 43°C
when dehumidifying
Refrigerating capacity*
Dimensions of internal unit:
• width
• height
• depth
• weight
*
Standard conditions:
Room temperature
Outside temperature
As the colours of the wires in the mains lead may not corre-
spond with the coloured markings identifying the terminals
in your plug, proceed as follows:
The green and yellow wire must be connected to the termi-
nal in the plug marked with the letter E or the earth symbol
or coloured green or green and yellow.
E
The blue wire must be connected to the terminal marked with
the letter N or coloured black.
L
The brown wire must be connected to the terminal marked
N
with the letter L or coloured red.
see rating plate
"
"
"
452 mm
800 mm
455 mm
33,5 kg
27°C
47% relative humidity
35°C
41% relative humidity
33

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis