Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - DeLonghi Pinguino FX180 eco Betriebsanleitung

Vorschau ausblenden Andere Handbücher für Pinguino FX180 eco:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 48
FX180eco
The air conditioner
doesn't work
The air conditioner
works for a short
time only
The air conditioner
works but doesn't
cool the room
Strange odour in the
room
Leaking condensa-
tion from the unit
around of the con-
ditioner
The air conditioner
doesn't work for
about 3 minutes
from turning on the
appliance
The 3 LED indicators
are flashing
Remote
signals are weak or
inexistent
32
Downloaded from
www.Manualslib.com
16-05-2002
14:53
Pagina 32

Troubleshooting

PROBLEMS
the power is off
the plug is not inserted into the electrical outlet
the fan is blocked
the security float was triggered
the exhaust tube is twisted
the exhaust tube is blocked
the drain tube is bent
a window is open
in the room there is some source of heat
(lamp, burner, etc.) or there are many peo-
ple in the room
the exhaust tube has come out of place
the air filter is dirty
the air conditioner has a capacity not ade-
quate for the conditions or the ldimensions of
the room
air filters dirty
condensation collection basin
incorrect installation of the appliance
the appliance's security system has interve-
ned
Condensation collecting-basin is full
control
Batteries run down
Batteries may be inserted incorrectly
manuals search engine
CAUSES
8
is full
SOLUTIONS
plug in the appliance
call the Service Centre
empty the basin
position exhaust tube correctly
check if there are obstacles
blocking the exhaust of air out
of the appliance
unbend the tube
close the open window
remove the heat source
reinsert the tube into its place
clean the filter or replace
clean the filter or replace it
empty the basin and drain the
water with the drainage tube
9
found on the back side of
the appliance
see page 22 to properly install
the appliance
wait for 3 minutes
empty out the basin.
remove the plug and reinsert,
If LEDs remain on, call the
Qualified Service
Change the batteries
Check the batteries' (+) and (-)
poles

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis