Programming The Timer - DeLonghi Pinguino FX180 eco Betriebsanleitung

FX180eco
AUTOMATIC SLEEP FUNCTION
Ideal for those wanting a peaceful night's sleep in a perfectly air
conditioned room.
• Press the
• A beep will indicate that the air-conditioner has turned on, and
• Now use the MODE button until you get the symbol for the func-
• Next select the desired temperature by pushing the
• Now press the
In this function, the fan functions automatically.
N.B: The night-time function makes it possible to keep a room at a perfect temperatu-

PROGRAMMING THE TIMER

Programming the ON function
With the air-conditioner already running, press the ON button: the
ON TIME symbol will start blinking and the clock will read 12:00.
Remember that the timer turns the air-conditioner on, thereby reset-
ting all the functions and procedures operating before the applian-
ce was last turned off.
• If the programming is the one you want, simply press the
• The increase or decrease will be in ten-minute (10-minute) seg-
• The ON TIME marking will continue to blink. By pressing down on
• To cancel the programming, push the ON button: the ON TIME
• At this point, use the CANCEL button: the clock will show the cor-
Programming the turn-off function
The procedure for programming the turn-off and cancellation ope-
rations is similar to the one just described: the only difference is that
you must push the OFF instead of the ON button.
Downloaded from www.Manualslib.com
16-05-2002 14:53 Pagina 29
Selecting functions
button to start the appliance.
the symbol will begin to blink.
tion you want.
tons.
to set up the night-time function: the
bol will appear. By pushing the
get the number of hours you want (from 1 to 7), you will set the
time for the appliance to switch off.
re, thus preventing an excessive rise or a drop in temperature while the silent ope-
ration is in effect. The air-flow will decrease, while the room temperature will vary
gradually to provide the ideal condition: the temperature will increase by 2° C.
after 60 minutes and by 2° C. after two hour.
button.
ments for each press of the button, whereas if you hold the but-
ton down the time will change more quickly.
the SET button again, you will get confirmation of the time set for
the appliance to turn on.
marking will blink while showing the turn-on time.
rect time at that moment.
manuals search engine
but-
sym-
button repeatedly until you
°C
HR
29