AEG FAVORIT 35400 VI Benutzerinformation Seite 32

32 www.aeg.com
Downloaded from www.Manualslib.com
Problem
Limescale particles
on the dishes.
Whitish streaks and
stains or bluish lay-
ers on glasses and
dishes.
Dry water drop
stains on glasses
and dishes.
The dishes are wet.
The dishes are wet
and matt.
manuals search engine
Possible cause
The programme was not
applicable for the type of
load and soil.
Incorrect position of the
items in the baskets. Water
could not wash all items.
The spray arms could not
turn freely.
The quantity of detergent
was not sufficient.
There was no detergent in
the detergent dispenser.
The salt container is emp-
ty.
The set level of the water
softener is incorrect.
The cap of the salt contain-
er is loose.
The released quantity of
rinse aid is too much.
The quantity of detergent
was too much.
The released quantity of
rinse aid was not suffi-
cient .
The quality of the deter-
gent can be the cause.
The programme had no
drying phase.
The rinse aid dispenser is
empty.
Possible solution
Make sure that the pro-
gramme is applicable for
the type of load and soil.
Make sure that the position
of the items in the baskets is
correct and that the water
can easily wash all items.
Make sure that the position
of the items in the baskets is
correct and does not cause
the blockage of the spray
arms.
Make sure that you add the
correct quantity of deter-
gent in the dispenser be-
fore you start a programme.
Make sure that you add de-
tergent in the dispenser be-
fore you start a programme.
Make sure that there is dish-
washer salt in the salt con-
tainer.
Make sure that the set level
of the water softener agrees
with the water hardness in
your area.
Tighten the cap.
Decrease the released
quantity of rinse aid .
Make sure that you add the
correct quantity of deter-
gent in the dispenser be-
fore you start a programme.
Increase the released quan-
tity of rinse aid.
Try a different brand of de-
tergent.
Set a programme with the
drying phase.
Make sure that there is rinse
aid in the rinse aid dispens-
er.