Technoline WS6440 Bedienungsanleitung Seite 16

2. Then press
minutes of your desired alarm time.
3. Press once, time digits change to alarm time digits "6:00" and "A2" is
displayed. Then repeat the above in Alarm 1 setting.
3. Your weather station will automatically return to normal mode in around 10 seconds if no further
buttons are pressed.
TO TURN ON OR OFF YOUR DAILY ALARM
Simply press
When Alarm 1 is turned on, the
TO USE SNOOZE ALARM
When time reaches your set alarm time, your weather station will give a beep sound to wake you up.
The corresponding
1) Press
flashing.
The alarm will beep again according to your set snooze duration.
2) When the alarm is sounding, press
become static, alarm will beep again at the same time next day.
Alarm Duration: 2 minutes
TO USE THE DIMMER
Press button once to adjust the display brightness for nighttime viewing.
TO DISPLAY TEMPERATURE IN DEGREE °C OR °F
Simply press WAVE /
WEATHER FORECAST AND PRESSURE TREND INDICATOR
Your weather station has a built-in barometric sensor which measures the change of the air pressure
once again, the alarm minute digits flash. Press
to turn on or off the Alarm 1, Alarm 2, or Alarm 1 & 2.
appears. When Alarm 2 is turned on, the
or will flash.
once to stop the alarm temporarily, the corresponding
(°C/°F) to display temperature in degree °C or degree °F.
once, the alarm beep will stop,
EN. 6
or button to set the
appears.
or keeps
or