Technoline WS6440 Bedienungsanleitung Seite 14

DCF SIGNAL RECEPTION AND SIGNAL INDICATOR
After your weather station is powered up, it starts to receive DCF signal. The
Weak or no DCF signal
Receiving strong DCF signal
Successful Reception
Failed Reception
Remark: when your weather station is receiving the radio controlled time signal, all buttons except the
snooze / light button do not function.
DCF TIME SIGNAL RECEPTION
Your weather station will automatically update itself to the exact time after receipt of the DCF time
code. The weather station will automatically attempt to receive the DCF signal every night at 1:00 am,
2:00 am, 3:00 am, 4:00 am and onwards. If it receives DCF signal at 3:00 am it will stop receiving
until 1:00 am next day.
To start DCF reception manually, press WAVE / – (°C/°F) button for 2 seconds. To stop DCF
reception, press and hold WAVE / – (°C/°F) for 2 seconds.
TO SET YOUR WEATHER STATION MANUALLY
The setting of your weather station comes into the sequence of Time Zone, 12/24 hour, hours,
minutes, year, month, date, month-date/date-month display and snooze duration.
1. Press and hold
zone:
-01 GMT 00 hour (e.g. UK)
00 GMT +1 hour (e.g. Germany)
01 GMT +2 hour (e.g. Finland)
2. Then press
"12 Hr" time format. When 12Hr time format is selected, PM indicator will be displayed.
3. Then press
set the hours. Press and hold
4. Then press
set the minutes. Press and hold
(only
(
(
(
for 2 seconds, time digits change to "00". Press
again, time digits change to "24Hr" and flash. Press
once again, "0" the hour digits flash. Press
/ will accelerate your setting faster.
once again, "00"" the minute digits flash. Press
/ will accelerate your setting faster.
icon flashing)
icon flashing)
icon becomes static)
icon disappear)
EN. 4
icon flashes.
/ to set the time
or to select
or button to
or button to