Technical Data; Troubleshooting - BOMANN SBS 7308 IX Bedienungsanleitung, Garantie

warm water and mild detergent; or with a clean,
damp microfiber cloth without cleaning agent.
 Remove the appliance content and storage it at a
cool location.
 After everything was thoroughly dried, you can
restart the operation.
Defrosting
The appliance keeps free from ice inside because of
the NoFrost System. A defrosting procedure isn´t
necessary.
Changing the bulb
CAUTION:
Do NOT remove the cover of the interior light.
The LED light may be replaced / repaired in case of
failure / defect only by an authorized specialist.

Troubleshooting

Before you contact an authorized specialist
Problem Cause / Action
Unit is not ∙ Check the power supply / tem-
working perature setting / ambient temper-
properly or ature. ∙ Unblock the ventilation
at all openings, install the unit freely.
Loading is ∙ Check the temperature setting /
too warm ambient temperature. ∙ Open the
door only as long as necessary.
Loud noise ∙ Check the appliance position.
during opera- ∙ See the section "Operating
tion noise".
Water on the ∙ Check the temperature setting.
unit bottom
Light does ∙ Check the power supply.
not work ∙ See "Changing the bulb".
Error codes
With some malfunctions, the display shows error
codes!
Code Cause
E1 Temperature sensor failure fridge section
E2 Temperature sensor failure freezer section
Freezing defrost sensor detection circuit
E5
error
Communication error
E6
E7 Ambient temperature sensor error
NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.

Technical Data

Electrical connection............................................
Power voltage: .........................220-240 V~ / 50 Hz
Defrost power: ...........................................240 W
Dimension H x W x D / Weight...............................
Appliance size: .....................178.8 x 89.5 x 69.0 cm
Net weight: ...................................approx. 90.0 kg
The right to make technical and design modifications
in the course of continuous product development
remains reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
48