Battery Status And Charging - Philips Sonicare DiamondClean Smart HX9901/63 Bedienungsanleitung

g. Brush head holder (specific types only)

Battery status and charging

Charging with glass (specific types only)
Charging with travel case (specific types only)
The brush head holder is designed to keep and
store your brush heads.
1 Plug the charging base into a wall socket.
2 Place the charging glass on top of the charging
base and place the handle in the glass.
The charging indicator flashes white until your
toothbrush is fully charged.
1 Place the handle in the charging travel case.
2 Connect the charging travel case to a laptop, a
wall-mounted USB socket or a suitable wall
adapter. The USB cord is attached to the travel
case and stored in the cord storage
compartment.
3 The battery indication flashes white until your
toothbrush is fully charged.
Important: The wall adapter must be a safe extra
low voltage source, compatible with the electrical
ratings marked on the device.
Important: Only toothbrush handels HX993W,
HX993B, HX993P, HX993S, HX993L, HX993R,
HX992W, HX992B, HX992P, HX992S, HX992R can
be charged in the travel case. Other products and
batteries are not compatible with the travel case.
Note: It takes at least 24 hours to fully charge your
Philips Sonicare. You do not have to fully charge
your handle before first use, as the handle is pre-
21
English