Before Use; Fitting The Accessories - Casals SD75 Handbuch

- Do not expose to extreme temperatures or strong magnetism.
- Keep the appliance in a dry, dust-free place, out of direct sunlight.
- Always check the workpiece before operation and remove any
obstructions such as nails, staples, screws, string, rags, cloths and
other debris.
- Never rest the appliance into a surface while in use.
- Let the appliance running with no load for 30 seconds in a safe
position. If you notice serious vibration or other defects stop the
appliance immediately. Then check the problem and /or proceed as
we describe on Anomalies and Repair clause.
- The appliance can be used on surfaces such as: wood, cardboard,
plastic, plaster, etc.
DESCRIPTION
A ON/OFF Switch
B Baseplate
C Dust tank
D 'Finger' Base
If the model of your appliance does not have the accessories
described above, they can also be bought separately from the Tech-
nical Assistance Service.
INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that all the product's packaging has been removed.
- Ensure that the voltage indicated on the rating label matches the
mains voltage before plugging in the appliance.
- Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.

FITTING THE ACCESSORIES

- Unplug the appliance from the mains.
- Push the sanding paper against the product, they unite by hook-
and-loop system.