Werbung
WARNING: IMPORTANT SAFETY INSTRUCTIONS
- IT IS IMPORTANT FOR THE SAFETY OF PERSONS TO FOLLOW THESE INSTRUCTIONS. SAVE THESE
INSTRUCTIONS.
- INCORRECT INSTALLATION CAN CAUSE SERIOUS INJURIES. FOLLOW ALL THE INSTALLATION
INSTRUCTIONS.
- Before installing the motorization, disconnect any equipment that is not necessary for motorized operation, and remove
all unnecessary ropes.
- The assigned torque and length of operation must be compatible with the characteristics of the driven part.
- The connection to the electrical network must be carried out in accordance with the instructions of standard BS7671.
- For external use, the power supply cable must not be weaker than an H05 RNF or H05 RRF cable. Cables in a PVC
sheath (H05 VVF) are reserved for interior use. However, they can be used outside if they are installed in a sheath.
- Take account of the starting intensities which cause drops in voltage at the line end, for the dimension of network
connection cables.
- The motor power supply circuit must be equipped with an all-pole cut-off device with contact opening of at least 3mm.
- If the power supply cable of this machine is damaged, it must only be replaced by the manufacturer or a person of
similar qualification in order to prevent an accident.
- You will find the list of all necessary components to the reliable operation of the engine, but not delivered with this one,
in DEPRAT catalogues.
- Failure to respect these instructions cancels the guarantee and DEPRAT's liability.
- The DEPRAT company cannot be held responsible for changes in the standard which occur after these instructions are
published.
- Photos, drawings and engine characteristics are not contractual.
ENGLISH
4
Werbung
