Cleaning; Cleaning Schedule; Cleaning The Body Of The Appliance; Cleaning The Water Tank, Water Tray And Nanocloud Rotary Humidification Wick - Philips HU5930 Benutzerhandbuch

5 Cleaning

Note
• Always unplug the appliance before
cleaning.
• Never immerse the appliance in
water or any other liquid.
• Never use abrasive, aggressive, or
flammable cleaning agents such as
bleach or alcohol to clean any part
of the appliance.
• Only the pre-filter and NanoCloud
rotary humidification wick are
washable. The NanoProtect filter
is not washable nor vacuum
cleanable.

Cleaning schedule

Frequency Cleaning method
Wipe the surface of the
When
appliance with a soft
necessary
dry cloth.
Rinse the water tank,
the water tray and
Every week
the NanoCloud rotary
humidification wick.
Clean the pre-filter.
When the
Descale the NanoCloud
cleaning
rotary humidication
icon
wick with the water and
lights up
white vinegar or citric
acid.
10 EN
Cleaning the body of the
appliance
Regularly clean the inside and outside
of the appliance to prevent dust from
collecting.
1
Wipe away dust with a soft dry cloth
from the body of the appliance.
2
Clean the air outlet with a soft dry
cloth.
Cleaning the water
tank, water tray and
NanoCloud rotary
humidification wick
Note
• Cleaning the water tank, water
tray and NanoCloud rotary
humidification wick every week to
keep them hygienic.
1
Pull out the water tank (fig. h).
2
Pull out the water tray (fig. }).
3
Take the wick wheel off the wick
support (fig. ~).
4
Rinse the water tank, water tray and
NanoCloud rotary humidification
wick under a running tap.
Note
• Do not take the NanoCloud rotary
humidification wick off the wheel
during cleaning.
• Do not scrub the NanoCloud rotary
humidification wick or place it under
direct sunlight.
• If necessary, use a mild detergent to
clean the water tank and water tray.
In this case, rinse the water tank
and water tray thoroughly.