Philips 3000 Serie Bedienungsanleitung Seite 18

1
2
2 Empty the drip tray and rinse it under the tap.
3 Empty the coffee grounds container and rinse it under a lukewarm tap.
4 Switch off the machine and unplug it.
5 Open the service door.
6 Press the PUSH button (1) and pull at the grip of the brew group to
remove it from the machine (2).
7 Open the lid of the pre-ground coffee compartment and insert the spoon
handle into the coffee funnel. Move the handle up and down until the
clogged ground coffee falls down.
8 Remove the coffee residues container, empty it and rinse it under a
lukewarm tap. Let it dry and then reinsert it.
9 Rinse the brew group thoroughly with lukewarm water. Clean the upper
filter carefully.
Caution: Do not clean the brew group in the dishwasher and do not use
washing-up liquid or a cleaning agent to clean it. This may cause the brew
group to malfunction and may have a negative effect on the coffee taste.
10 Let the brew group air-dry thoroughly.
Note: Do not dry the brew group with a cloth to prevent fibers from
collecting inside the brew group.
11 Clean the inside of the machine with a soft damp cloth.
English
19