Learning To Ride - Segway ninebot one s2 Bedienungsanleitung

8

Learning to Ride

Rider must weigh 88–330 lbs (40–150 kg)
and must be 4'3"–6'6" (130–200 cm) tall.
Wear an approved helmet and other protective
gear to minimize any possible injury.
1 Put one foot on the pedal, and move
the vehicle back and forward.
08
After activation, the App will lead you through the New Rider
Tutorial. Please follow the instructions in the App and in this
manual.
NOTE
You must first download the Segway-Ninebot App on your
mobile device. The App will lead you through the New Rider
Tutorial.
For your safety, the Ninebot One S2 will limit the max speed to
4.3 mph (7 km/h) until you complete the New Rider Tutorial.
For the first 0.6 miles (1 km) after completing the New Rider
Tutorial, the max speed will be limited to 12.4 mph (20 km/h),
after which you can disable the speed limiter and reach a
maximum speed of 28 mph (45 km/h).
2 Place one foot on the pedal, keep your
legs and body upright, and gradually
move the center of your body weight up.
3 Place one foot on the pedal, raise the
other off the ground for 1–2 seconds,
and slide forward.
5
Place both feet on the pedals and
direct the vehicle by adjusting your
center of gravity.
4 Place one foot on the pedal, push the
other foot down on the ground, and
slide forward.
6 6 Turn by shifting your weight onto the
foot.
09