Charging; Battery Charge Level; First Use - Segway ninebot one s2 Bedienungsanleitung

5

Charging

Turn off your vehicle before charging.
WARNING
Do not connect the charger if the charge
port or charge cable is wet.
When charging, press the power button to
enable a visual display of the charge
level.
Your vehicle is fully charged when the
LED on the charger changes from red
(charging) to green (trickle charge).
6

Battery Charge Level

7 7
6 6
5 5
High
4 4
—
50% 100%
3 3
2 2
Green
1 1
The battery charge level display appears when the vehicle is kept stationary.
Each pair of lights represents 14% of battery life. W hen the batte
Use the App to read the remaining power and estimated remaining range.
As the power level decreases, your vehicle will gradually reduces the speed limit.
06
1 Locate the
charge port
2 Open the charge
port cover
3 Plug the charger
into the unit
7 7 7
6 6 6
5 5 5
Medium Low
4 4 4
— —
20% 50% 0% 20%
3 3 3
2 2 2
Yellow Red
1 1 1
y r y r s i s i n e a rly empty the lights
7

First Use

There are safety risks when learning to ride the Ninebot One S2. You must read the Safety
Instructions and follow the New Rider Tutorial in the App before your first ride.
For your safety, your Ninebot One S2 is not activated at this time and will beep occasionally after
Power ON. Until activated, the Ninebot One S2 maintains a very low riding speed and steering
sensitivity, and should not be ridden. Install the App on your mobile device (with Bluetooth 4.0 or
above), connect to the Ninebot One S2 with Bluetooth, and follow the App instructions to activate
your Ninebot One S2 and follow the training procedures.
Scan the QR code to download the App
(iOS 9.0 or above, Android™ 4.3 or above).
1 Install the App and register/login.
Hold the vehicle upright and power it on.
2
Turn it off and on again to familiarize
yourself with the controls.
7
6
5
4
3
3 Click "Search Device" to connect to your vehicle.
2
The vehicle will beep to indicate a successful
1
connection.
4
Follow the instructions in the App.
07