Specifications; Certification - Segway ninebot one s2 Bedienungsanleitung

12 Specifications
Item
DimensionsVehicle Size
Max. Payload
Weight
Net Weight
Age
Rider
Requirements
Height
Max. Speed
1
Typical Range
Max. Slope
Beginner Mode
Machine
Parameters
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Type
Nominal Voltage
Max. Charging Voltage
Battery
Charging Temperature
Nominal Capacity
Battery Management System
Nominal Power
Motor
Max. Power
Display Lighting
Typical Range: tested while riding under full power, with 154 lbs (70 kg) load, at 77°F (25°C), and an
1
average speed of 9.3 mph (15 km/h) on level pavement. Range varies with payload, environment,
temperature, road conditions, and other variables.
16
Ninebot One S2 Parameters
17.6 x 16.6 x 7.2 in (448 x 419 x 189 mm)
264 lbs (120 kg)
25 lbs (11.4 kg)
16–50 years
4' 0"–6' 6" (120–200 cm)
14.9 mph (24 km/h)
~18 miles (~30 km)
~15°
Beginner mode is automatically deactivated after 0.6 miles
(1 km) of riding. Enable beginner mode at any time via the App.
Pavement, packed dirt, slopes < 15°, obstacles < 1.2 inches
(3 cm), gaps < 1.2 inches (3 cm).
14–104°F (-10–40°C)
-4–122°F (-20–50°C)
IPX4
Li-ion battery pack
54.3 VDC
63 VDC
32–104°F (0–40°C)
310 Wh
Over-voltage, under-voltage, short circuit, and over-heating
protection. Auto-sleep and auto-wake.
500 W
1000 W
Ring type display panel on both sides, with 14x2 independent
RGB LEDs, battery level display, and customized light patterns.
Model Number
Manufacturer
Supplier
Nominal Power
Input Voltage
Charger
Output Voltage
Output Current
Charging Temperature
Charge Time
Compliance
13

Certification

European Union Compliance Statement
Battery recycling information for the European Union
Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC
and amendment 2013/56/EU concerning batteries and accumulators and waste batteries and
accumulators. The Directive determines the framework for the return and recycling of used batteries and
accumulators as applicable throughout the European Union. This label is applied to various batteries to
indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per the Directive.
In accordance with the European Directive 2006/66/EC and amendment 2013/56/EU, batteries and
accumulators are labeled to Indicate that they are to be collected separately and recycled at end of life.
the label on the battery amy also include a chemical symbol for the metal concerned in the battery
(Pb for Lead, Hg for mercury, and Cd for Cadmium), Users of batteries and accumulators must not
dispose of batteries and accumulators as unsorted municipal waste, but use the collection framework
available to customers for the return, recycling, and treatment of batteries and accumulators. Customer
participation is important to minimize any potential effects of batteries and accumulators
HT-A10-120W
Chingmi (Beijing) Technology Co., Ltd.
Chingmi (Beijing) Technology Co., Ltd.
120 W
100–240 VAC @ 50–60 Hz
Approx. 63
Approx. 1.9 A
32–104°F (0–40°C)
3 hours
CCC,CB,CE,FCC,UL,PSE,KC,SAA
17