Krups AUTOMATIC EA80 Serie Bedienungsanleitung Seite 10

empty the Fill tank
coffee grounds
collector
° °
° °
° °
°
° °
°
°
°
°
° °
° °
° °
° °
° °
° °
° °
° °
° °
° °
° °
° °
° °
°
: Light off
: Light on
Warning signals
Empty the coffee grounds collector, the drip tray, and the coffee drawer; the light will remain on if the coffee
grounds collector is not properly inserted or if it has been put back in place 4 seconds later.
Fill water tank
Clean
Proceed with cleaning
CalC
Proceed with scale removal
Clean + CalC
Carry out a long rinse
Lights
Clean Calc
° °
° °
° ° °
° °
° ° °
° °
° °
° °
° °
° °
°
°
° °
°
°
° °
° °
° °
° °
° °
On / Off
The appliance is ready for a coffee or steam cycle.
°
Slow flashing: the device is in the preheating phase or
an initialisation cycle.
Double flash: a 2 coffee cycle is in process.
°
Product support information in operating parameters
setting mode.
Empty the coffee grounds collector (a 2 coffee cycle is
underway).
Empty the coffee grounds collector + clean the drawer
+ empty the drip tray.
Check coffee grounds collector is not missing or
incorrectly positioned. Check cleaning tray is not missing
°
or incorrectly positioned.
Set water hardness.
Fill tank with water. Check water tank is not missing or
°
incorrectly positioned.
Coffee cycle has stopped due to lack of water.
°
Fill tank with water.
Setting auto off automatic cut-off.
Cleaning program requested or in process.
Cleaning program: preparing cleaning or rinsing cycle.
°
Setting coffee temperature.
Scale removal program requested or in process.
Scale removal program: preparing scale removal or
rinsing cycle.
Rinsing cycle or scale removal cycle: request to empty
water tank, rinse it and fill with fresh water.
Long rinse request.
° Long rinse in progress.
Constant flashing: operating fault.
°
Alternate flashing: Switching off of the appliance under
°
progress.
°
: Light flashing
: Light double flashing
Setting the coffee bean grinding fineness
Standard
Strong coffee
Meaning
11