Charging The Battery; Accessing Sim Card Slot And Microsd Card Slot - ACD XT30 Series Kurzanleitung

B. CHARGING THE BATTERY
Important Note: The main battery charges the backup battery in the XT30 Series device. When discharged,
the backup battery requires approx. 1.5 hours to recharge.
To charge the battery using the included AC/DC Power Adapter Kit:
1. Connect the AC/DC adapter to XT30 Series.
2. Plug in the AC/DC adapter. Use only easily accessible wall sockets that are easily reached with the
length of supplied power cable.
To charge the battery using a Cradle Kit:
1. Connect the power supply to the cradle.
2. Plug in the power supply. Use only easily accessible wall sockets that are easily reached with the
length of supplied power cable.
3. Place the device in cradle. The LED on the device will illuminate to confirm connection.
4. The battery is fully charged in approximately 2.5 hours.
5. To charge a battery in the spare battery well, insert the battery into the well top down (connectors on
the battery should face downward and to the back of the cradle) and gently press down. The LED
light on the cradle will illuminate to confirm connection.
C. ACCESSING SIM CARD SLOT and MICROSD CARD SLOT
1. Remove the back cover.
2. Remove battery from the XT30.
3. MicroSD card slots and SIM slot are now accessible. Insert the MicroSD or SIM with gold-colored
contacts facing downward.
4. Replace the battery.
5. Replace the battery cover.
XT30 Series_Kurzanleitung_Quick Start Guide_V1.00_de_en 11 / 14