Mounting On A Table - LG 43UF69 Serie Benutzerhandbuch

Adjusting the menu
When the TV is turned on, press the joystick button one time. You can
adjust the Menu items moving the joystick button up, down, left or
right.
Turns the power o .
Clears on-screen displays and returns to TV viewing.
TE
When your nger over the joystick button and push it to the up,
down, left or right, be careful not to press the joystick button. If you
press the joystick button rst, you may not be able to adjust the
volume level and saved programmes.

Mounting on a table

(Image shown may di er from your TV.)
1 Lift and tilt the TV into its upright position on a table.
Leave a 10 cm (minimum) space from the wall for proper
ventilation.
10 cm
2 Connect the power cord to a wall outlet.
Do not place the TV near or on sources of heat, as this may result in
re or other damage.
Using the kensington security
system
(This feature is not available for all models.)
Image shown may di er from your TV.
The Kensington security system connector is located at the rear of the
TV. For more information of installation and using, refer to the manual
provided with the Kensington security system or visit http://www.
kensington.com. Connect the Kensington security system cable between
the TV and a table.
(This feature is not available for all models.)
Insert and tighten the eye-bolts, or TV brackets and bolts on the back
of the TV.
If there are bolts inserted at the eye-bolts position, remove the
bolts rst.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear
of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the at surface.
Make sure that children do not climb on or hang on the TV.
TE
Use a platform or cabinet that is strong and large enough to
support the TV securely.
Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.