Getting Started; Setting Up - Pure Contour 100Di Handbuch

Getting started

Setting up

1 Fully extend the aerial.
3
Insert the connector of the
mains power adapter into
the socket on the rear of the
radio.
Attach the appropriate
adapter pins for your region,
if required and plug in to the
mains supply.
4
4 Press and on the remote to view the
available languages (English/French/German/
Italian) used for displaying menus and options
and press Select to confirm your choice.
4 5
Wait for Contour 100Di to complete an
autotune, which finds all available digital
stations (this takes about one minute).
When the autotune is complete, a digital
station will be selected.
4
2
Pull the plastic tab from
the remote control
battery compartment
and remove the
protective film from
remote buttons.
LANGUAGE
DR
SCAN
DR
bBC R2
26