Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Using a Conditional Access
Module
IMPORTANT: Insert or remove the CI module only
when the TV is SWITCHED OFF.
•
In order to watch certain digital channels, a
conditional access module (CAM) can be necessary.
This module must be inserted in the CI slot of your
TV.
•
Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the
following procedure.
•
Insert the CAM and then the viewing card to the
slot that is located in the terminal cover at the rear
side of the TV.
•
The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.
Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
•
When no module is inserted, "
Interface module detected" message appears on
the screen.
•
Refer to the module instruction manual for details
of the settings.
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on
the service provider.
Press MENU button and select the icon by using "
" or " " button. Press OK button to view Settings
menu. Use " " or " " button to highlight Conditional
Access and press OK to view menu items.
Con guring Language
Preferences
You can operate the TV's language settings using
this menu.
Press MENU button and select the Settings icon by
using " " or " " button. Press OK button to view
Settings menu. Use " " or " " button to highlight
Language and press OK to continue:
Use " " or " " button to set an item. Settings are
stored automatically.
Menu: displays the system language.
Preferred
These settings will be used if available. Otherwise the
current settings will be used.
•
Audio
: Sets the preferred audio language.
•
Subtitle
language will be seen in subtitles.
•
Teletext
No Common
•
Guide
: Sets the preferred Guide language.
Current (*)
(*) These settings can be changed if only the
broadcaster supports. Otherwise, settings will not be
available to be changed.
•
Audio
: Changes the audio language for the current
channel.
•
Subtitle
channel.
Parental Control
To prohibit viewing of certain programmes, channels
and menus can be locked by using the parental
control system.
This function enables or disables the menu protection
system and allows the PIN code to be changed.
Press MENU button and select the Settings by using
" " or " " button. Press OK button to view Settings
menu. Use " " or " " button to highlight Parental
and press OK to continue:
To display parental lock menu options, PIN number
should be entered. Factory default PIN number is
0000. After coding the correct PIN number, parental
settings menu will be displayed:
English - 69 -
: Sets the subtitle language. Selected
: Sets teletext language.
: Sets the subtitle language for the current
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
