Auto Wall- Mount Adjustment - Samsung PS50A656 Bedienungsanleitung

Auto Wall- mount adjustment (Sold separately)(PS50A5)
Once the auto wall mount is installed, the position of your TV can be easily adjusted.
Rear Panel
Serial Cable(1P to 1P)(Not supplied)
Entering the menu
1 Press the ▲, ▼, ◄ or ► button on your remote control.

The Wall Mount Adjustment screen is displayed.

If the Wall Mount Adjustment screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
• Press the MENU button to display the menu. Press the
▲ or ▼ button to select Setup, then press the ENTER
button.
• Press the ▲ or ▼ button to select Auto Wall-Mount,
then press the ENTER button.
Remembering the Position
 Adjust to the desired position using the ▲, ▼, ◄, ► buttons.

If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.

Press the INFO button to reset. Press the ◄ or ► button
to select Yes, then press the ENTER button. The position
is initialized to the default setting.
 Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position1, Position or Position in order to save the current
position.

To not save the current position, press the RETURN
button.

When selecting a save mode, you cannot use the Color
buttons.
4 Press the ENTER button to save.

When Position1 is selected, the message Current
position saved as Position1 is displayed.
5 Press the ENTER button.

The saved Position appears on the left side of the OSD.
English - 5
Auto Wall-Mount
T V Setup
Plug & Play
Language : English
Time
Auto Wall-Mount
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Move Enter
Auto Wall-Mount
Position1
► ►
Position
1 
Adjust Save
INFO
Save
Select a mode to Save.
Position 1
Position 2
Position 3
Move Enter
Continued...








Return

Center
Return