Product Information - Samsung PS50A656 Bedienungsanleitung

4. System
This menu consists of 4 sub-menus:
Product Information, Signal Information, Software
Upgrade, and Reset.

− Product Information

You can view your product information. For service or repair,
please contact a Samsung approved dealer.
 Press the ENTER button with Product Information
selected. The product information menu is displayed.
− Software Version / Firmware Version
− Signal Information
You can get information about the signal status.
 Press the ENTER button with Signal Information
selected. The technical information for signal status is
displayed.
− Service / Service ID / Multiplex / Network / Bit
error level / Signal Strength
− Software Upgrade (Option)
To keep your product up-to-date with new digital television
features then software upgrades are periodically broadcast
as part of the normal television signal. It will automatically
detect these signals and display the software upgrade
banner. You are given the option to install the upgrade.
 Software Inforamtion
Press the ENTER button, then the current software
version is shown. To display the software version
information, press the ENTER button again.
 Manual Upgrade
Press the ENTER button to search for new software
from the currently broadcasting channels.
 Standby Mode Upgrade : On / Off
Press the ENTER button. To continue software upgrade
with master power on, Select On by pressing the ▲ or
▼ button.
45 minutes after entering standby mode, a manual
upgrade is automatically conducted. Since the power
of the unit is turned on internally, the screen may be
on slightly for the PDP product. This phenomenon
may continue for more than 1 hour until the software
upgrade is completed.
− Reset
You can reset the values stored to the factory default values.

The Reset operation deletes all channel information
and user preferences returning all values to their default
factory state.
 Press the ENTER button with Reset selected.
The Enter PIN is displayed.
 Enter your current 4-digit PIN code by using the
numeric buttons (0~9). The warning message is
displayed. All values will be reset by pressing the
coloured buttons (red, green, yellow, and blue) in turn.

The default PIN of a new TV set is "0-0-0-0".

When PIN is changed in Child Lock, the PIN for
resetting automatically changes.
 When reset is complete, it operates DTV Plug & Play
(DTV Auto Store, Time Zone-depending on the country,
Time Setting) and exits from the digital TV mode without changing to the analog TV mode.
(Refer to page 10~11)
English - 4
DTV
Setup

System
Move Enter
DTV
System
Product Information
Signal Information
Software Upgrade
Reset
Move Enter
DTV
Product Information
Software Version: T- PERLDEUC-100
Firmware Version: T-EMMADEUB-010
Return
DTV
Signal Information
Service: ?
Service ID: 0000
Multiplex: ? (TSID 0000,ONID 0000)
Network: ? (ID 0000)
Bit error level: 10
Signal Strength: 0
Return
DTV
Software Upgrade
Software Information
Manual Upgrade
Standby Mode Upgrade : On
Move Enter
DTV
Reset
WARNING: All channel settings and user preferences will be
lost and returned to the factory defaults. It is recommended
that a reset is performed only when serious problems are
experienced.
Return

Return




Return



Return