Technical Specifications - Victron energy Inverter RS Smart Solar 48/6000 Anleitung

6. TECHNICAL SPECIFICATIONS

Parallel and 3-phase operation
Maximum PV input power
Maximum DC charging power
DC Input voltage range
Output
Continuous output power at 25°C
Continuous output power at 40°C
Continuous output power at 65°C
Peak power
Short-circuit output current
Maximum efficiency
Zero load power
Low battery shutdown
Low battery restart
Maximum DC voltage
Nominal DC voltage
Start-up voltage
MPPT voltage range
DC input current limit
Maximum DC input current
Earth leakage trip level
Isolation fail level
(detection before start-up)
Charge voltage 'absorption' (V DC)
Charge voltage 'float' (V DC)
Maximum charge current
Battery temperature sensor
Battery voltage sense
Auxiliary output
Programmable relay (3)
Protection (2)
VE.Direct port and VE.Can port
General purpose analog/digital in port
Remote on-off
Operating temperature range
Humidity (non-condensing)
Material & Colour
Protection category
Battery-connection
PV Connection
230 V AC-connection
Weight
Dimensions (hxwxd)
Safety
Emission, Immunity
1) Can be adjusted to 60 Hz
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 230 VAC on inverter output
g) Solar earth leakage
3) Programmable relay which can be set for general alarm, DC under voltage or genset start/stop function, including minimum closed time and
relay-off delay. DC rating: 4A up to 35VDC and 1A up to 70VDC
48/6000
no
4000W
4000W
INVERTER
38 – 64V
Output voltage: 230 VAC ± 2%
Frequency: 50 Hz ± 0,1% (1)
Increases linearly from 4800W at 46 VDC to 5300W at 52 VDC
4500W
3300W
9kW for 3 seconds
50A
96.5% at 1 kW load
94% at 5 kW load
20W
37.2 V (adjustable)
43.6 V (adjustable)
SOLAR
450V
300V
120V
80 – 400V
18A
20A
30 mA
100 kΩ
CHARGER
57.6V
55.2V
100A
Yes
Yes
GENERAL
No
Yes
a - g
Yes
Yes, 2x
Yes
-40 to +65°C (fan assisted cooling)
max 95%
ENCLOSURE
steel, blue RAL 5012
IP22
Two M8 bolts
2 positive & 2 negative MC4
Screw terminals 13 mm² (6 AWG)
11 kg
425 x 440 x 125 mm
STANDARDS
EN-IEC 60335-1, EN-IEC 60335-2-29,
EN-IEC 62109-1, EN-IEC 62109-2
EN 55014-1, EN 55014-2
EN-IEC 61000-3-2, EN-IEC 61000-3-3
IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
7