Specifications - Makita DTW281RTJ Betriebsanleitung

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star marking
5 LED display
6 Switch trigger
7 Lamp
8 Reversing switch lever
9 Changed in three steps

SPECIFICATIONS

Capacities
Square drive
–1
No load speed (min
Impacts per minute (min
Overall length
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for fastening bolts and nuts.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
Explanation of general view
10 Hard
11 Medium
12 Soft
13 Socket
14 Square drive
15 O-ring
16 Pin
17 Hook
18 Screw
Model
Standard bolt
High tensile bolt
Impact mode (Hard)
) Impact mode (Medium)
Impact mode (Soft)
Impact mode (Hard)
–1
) Impact mode (Medium)
Impact mode (Soft)
Net weight
DTW280
M10 – M20
M10 – M16
12.7 mm
0 – 2,800
0 – 2,100
0 – 1,600
0 – 3,500
0 – 2,600
0 – 1,800
147 mm
1.5 kg
D.C. 14.4 V
CORDLESS IMPACT WRENCH SAFETY
WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
ENE036-1
of the power tool "live" and could give the operator
an electric shock.
2. Wear ear protectors.
3. Check the socket carefully for wear, cracks or
GEA010-1
damage before installation.
4. Hold the tool firmly.
5. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
6. The proper fastening torque may differ depend-
ing upon the kind or size of the bolt. Check the
torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
19 Groove
20 Standard bolt
21 Fastening torque
22 Fastening time
23 Proper fastening torque
24 High tensile bolt
DTW281
M10 – M20
M10 – M16
12.7 mm
0 – 2,800
0 – 2,100
0 – 1,600
0 – 3,500
0 – 2,600
0 – 1,800
147 mm
1.7 kg
D.C. 18 V
GEB049-2
5