Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setting-up the bending tool d26 – d63
Put the hydraulic cylinder on the
base plate.
Plug the required bending template
onto the front side of the hydraulic
cylinder.
Connect the hydraulic coupling with
the hydraulic nipple of the bending
tool.
1
Insert the dimension-related bend-
ing rolls into the corresponding size
holes by use of the retaining bolts.
3
Attention: For the dimensions d26
to d40, the adapter nipple has to be
assembled first (srewed connection).
5
Connect the control cable of the
bending tool with the device socket
on the hydraulic device.
The re-packaging of the bending
tool is carried out in the reverse
sequence.
2
4
6
15
Werbung
