Operation Manual
9.
Accessories / Components
CEDES
Description
Part no.
104 565
OptiLink
CD-ROM with OptiLink - Software and Safety -
103 282
Configurator
104 058
Manual "Configuration Tool Light Curtains"
105 784
Manual "Configuration Tool Control Units"
103 211
Velcro fastener for Safe2+/4
104 709
OptiLink fastener for SafeCIS3
301 500
Suction head transparent
© CEDES/April 2007
10. Maintenance and inspection
The OptiLink contains only electronics and no mov-
ing parts. Therefore it needs no preventive mainte-
nance.
10.1. Cleaning
The suction cup has to be cleaned to be sure opti-
mal adhesion is not prevented by powder or dust.
Occasionally degrease it.
Do not use aggressive solvents or abrasive sub-
stances. Otherwise the suction cup may become
brittle.
10.2. Test
Functional Test
The function of the OptiLink can easily be tested
together with a CEDES device, equipped with an
OptiLink interface together with the CEDES con-
figuration tool software. Data communication can be
tested using the diagnosis function.
www.cedes.com
OptiLink
7