Function Of Powerline Network (Powerline Communication); Basic Functions - NUK Eco Smart Control 300 Bedienungsanleitung

4. Save the preferred recording settings
(see "Recording settings:" on page 30).
5. To view the videos recorded, press
"Event" on the start screen
Note: The recordings can only be viewed
on your smartphone/tablet if your device
is connected with the camera and this is
active.
A list of recordings will appear.
6. To view a
corresponding row.

8.1 Basic functions

A Powerline adapter 17 is integrated into
your electric supply network via a socket.
The power cable is used to connect the
adapter to the Internet via your router or
modem.
A Powerline adapter is also installed in the
camera, which exchanges data with the
Powerline adapter 17 via your supply cable.
The Powerline adapter 17 creates its own
WiFi/WLAN network which your smartphone
uses to access up to 4 connected cameras
from home or on the go (see "5.3 Preparing
the smartphone/tablet" on page 26).
The Powerline network comes with a
standard encryption.
.
recording, select
8. Function of Powerline network
(Powerline Communication)
7. By pressing "Search", a new menu will
appear in which you can set the search
period.
If you select "Custom period", you can
enter the date and time for the search
period.
8. To view the recordings on a PC, you will
need the following:
– a USB adapter to connect the MicroSD
card with the PC, a reader or a
MicroSD slot on your PC;
– video playback software that can read
and playback the camera's HD264
format (a codec may need to be
retrofitted) or video converter software
that converts the HD264 video camera
format to a well-established format,
such as mp4.
9. To delete all videos, the MicroSD card will
need to be reformatted (see "Formatting
the SD card:" on page 31). It is not
the
possible to delete videos individually.
8.2 Setting up a second
network
Normally (with just one camera 11 and a
Powerline
factory-provided
unproblematic. It is identical for both the
camera and the Powerline adapter 17 to
ensure they work successfully with each
other.
A second network only needs to be set up if
the installation is an elaborate one, involving
several cameras and Powerline adapters
that need to work independently of each
other.
As both networks use the same supply
cables, you will need to have different
encryptions.
To set up a new encryption for the second
network, proceed as follows:
32
adapter 17), the
encryption
standard,
is