Heinner HBM-900WHBK Bedienungsanleitung Seite 26

www.heinner.com
"TIME-" to increase or decrease the delay time at the increment of 10 minutes. The
maximum delay is 13 hours.
Example: Now it is 8:30p.m, if you would like your bread to be ready in the next morning
at 7 o'clock, i.e. in 10 hours and 30 minutes. Select your menu, color, loaf size then press
the TIME+ or TIME - to add the time until 10:30 appears on the LCD. Then press the
STOP/START button to activate this delay program. You can see the dot flashed and LCD
will count down to show the remaining time. You will get fresh bread at 7:00 in the
morning, if you don't want to take out the bread immediately, the keeping warm time of
1hour starts.
Note: For time delayed baking, do not use any easily perishable ingredients such as
eggs, fresh milk, fruits, onions, etc.
KEEP WARM
Bread can be automatically kept warm for 60 minutes after baking. If you would like to
take the bread out, switch the program off with the START/STOP button.
MEMORY
If the power supply has been broken off during the course of bread making, the process of
bread making will be continued automatically within 10 minutes, even without pressing
Start/stop button. If the break time exceeds 10 minutes the memory cannot be kept and
the bread maker must be restarted，But if the dough is no further than the kneading
phase when the power supply breaks off, you can press the "START/STOP" straight to
continue the program from the beginning .
ENVIRONMENT
The machine may work well in a wide range of temperatures, but there could be a
difference in loaf size between a very warm room and a very cold room. We suggest the
room temperature should be between 15 ℃ and 34℃.
WARNING DISPLAY
4. If the display shows "HH: H" after the program has been started, (see below figure
1) the temperature inside is still too high. Then the program has to be stopped. Open
the lid and let the machine cool down for 10 to 20 minutes.
5. If the display shows "Er: r" after you have pressed START/STOP, (see below figure 2)
the temperature sensor is disconnected please check the sensor carefully by
Authorized expert.
6. If the display shows"LL:L"after pressing the Start/Stop button ( except the programs
BAKE), it means the temperature inside is too low（accompanied by 5 beep sounds）,
stop sound by pressing the Start/Stop button, open the lid and let the machine rest
for 10 to 20 minutes to return to room temperature.
Fig. 1
600W, 220-240V~50/60Hz
Fig. 2 Fig. 3