Sanyo VA-EXH Bedienungsanleitung Seite 8

e00_l8hcb_xe_7.book Page 7 Thursday, March 10, 2005 3:23 PM
1 HARD DISK INSTALLATION AND CONNNECTION TO DVR
Connecting the cable to the fourth hard disk (
Arrange the cables so that they do not come in contact with
the fan.
(3) Connect the cable to the S-ATA terminal on the hard disk.
S-ATA terminal
Confirm the position of the rib before inserting the
connector.
6
Connect the power cord.
(1) Select the power cord with the same number as the hard
disk in step 5, and remove the securing clamp with a
screwdriver.
* See the following diagram for cord numbers.
(2) To prevent the cords coming in contact with the fan,
secure them at two points with the clamps.
English
4
) (3) Connect the cord to the hard disk power connector.
[Arranging the cables]
The first hard disk is installed in position
Rib
The second hard disk is installed in position
The third hard disk is installed in position
3
: Cord for the
third hard disk
2
: Cord for the
second hard disk
4
: Cord for the
fourth hard disk
1
: Cord for the
first hard disk
The fourth hard disk is installed in position
7
Power connector
Rib
1
.
2
3
.
4
.
.