Intermec CN2 Kurzanleitung Seite 4

2 Place the CN2 in the USB dock.
3 Look at the battery light on the
CN2A battery light
Troubleshooting
If you have problems, make sure the:
• battery is correctly installed in the CN2.
• CN2 is firmly seated in the USB dock.
• power supply and country-specific power cord are properly
If you need more help, please visit our Product Support web site
at intermec.custhelp.com, or call 1-800-755-5505.
Where to Find More Information
For help with a CN2A, see the CN2A Mobile Computer User's
Manual (P/N 075464). For help with a CN2B, see the CN2B
Mobile Computer User's Manual (P/N 935-001-xxx).
Visit the Intermec web site at www.intermec.com to download
our current manuals (in PDF). To order printed versions of the
Intermec manuals, contact your local Intermec representative or
distributor.
4
Downloaded from www.Manualslib.com
You can use the CN2 while the
battery charges.
The battery is fully charged in
approximately 4 hours.
CN2 to check the battery status:
• Red: The battery is charging.
• Green: the battery is fully
charged.
N2
connected to a powered AC outlet.
manuals search engine
Not used
Power light
CN2B battery light