Proper Use; For Safe Operation; Safety Information - led2work INROLED_70 230V AC Betriebsanleitung

INROLED_70 230V AC

1 | Proper use

The luminaire is used for illumination. The luminaire is intended for mounting in a lumi-
naire holder or mounting bracket.
For connection values see "Technical data". The supply cable is connected to the lumi-
naire via a cable connection and a WAGO terminal.
The safety information and all other information in this manual must
be followed. Read the entire operating manual carefully before
mounting and turning on.
Keep the operating manual with the device. It must be stored and
handed over to third parties when the product is passed on.

2 | For safe operation

The operating parameters of the LED luminaire specified on the type plate must cor-
respond to the supply parameters of the machine or of the transformer.
Under no circumstances may the luminaire be covered with cloths,
foils or similar. Object distance from the luminaire should be at
least 10 cm.
Avoid spikes in the power supply in the machine: When oper-
ating the LED lamp on a 220-240V~ power supply, there can be
very strong spikes while starting larger machines (inductors) which
are also powered from the network. This can destroy the LED
lamps.
Exchange of the PSU: The integrated power supply unit has to be
exchanged by qualified personnel only.

3 | Safety information

Installation of electrical equipment may only be carried out by quali-
fied electricians.
Follow the five safety rules according to DIN VDE 1005.
Failure to do so may result in damage to the LED luminaire, as well
as fire or other hazards.
Danger of electric shock! Disconnect before working on the
device or load. Ensure to disconnect all circuit breakers that supply
dangerous voltages to the device or load, when doing so. Even
when the device is switched off, the load is not galvanically isolated
from the mains.
Only use the device if it is completely free of faults, and with safety
and awareness in mind. If warnings or symbols are attached to the
luminaire, they must not be removed.
| 9
www.led2work.com