Herunterladen Inhalt Inhalt Diese Seite drucken

Pioneer SC-LX78-S Kurzanleitung Seite 7

Vorschau ausblenden Andere Handbücher für SC-LX78-S:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 34
STEP 2-2
Connecting to a Wireless LAN Router (Manual setting version)
Tip
When manually connecting to a wireless LAN router or if it is not possible to connect to the
wireless LAN router using the WPS button version, refer to this section.
When the computer to be used for setting is communicating over the wireless LAN,
disable the wireless LAN.
To use two or more of this unit, you need to change the IP address of the units. For details,
refer to "Troubleshooting" (page 14).
Checking the Network to be Connected
Before connecting and setting up the unit, you will need the wireless LAN setting information of
your wireless LAN router. Write the information down in the blank spaces in below tables.
* For details of how to confirm the wireless LAN setting information, refer to the instruction
manual for your wireless LAN router.
When the security setting is WEP
Name
(1)
SSID (connection name)
(2)
Authentication method
Open
(3)
Authentication key type
Hexadecimal (Hex)
(4)
Default key
Key 1
(5)
Encryption key
*1: Hexadecimal (0 to 9 and A to F)
*2: ASCII (Half-width alphanumeric characters [Case sensitive])
When the security setting is WPA/WPA2
Name
(1)
SSID (connection name)
(2)
Authentication method
WPA-PSK
(3)
Authentication key type
Hexadecimal (Hex)
(4)
Encryption type
TKIP
(5)
Encryption key
*1: Hexadecimal (0 to 9 and A to F)
*2: ASCII (Half-width alphanumeric characters [Case sensitive])
Tip
The unit cannot be connected to a wireless LAN router having an SSID (connection name)
including a semicolon ";". For details of how to change the SSID (connection name), refer to
the instruction manual for your wireless LAN router.
Wireless LAN setting information
Shared
*1
Text string (ASCII)
Key 2
Key 3
Key 4
Wireless LAN setting information
WPA2-PSK
*1
Text string (ASCII)
AES
Connecting the Unit to a Computer
1
Turn off the power of the computer.
2
Using the LAN cable side of the supplied cable, connect the LAN port of
this unit to the LAN port of the computer.
The position of the LAN port and what it is called differ depending on the device. If you are
not sure about the LAN port, refer to the instruction manual for your device.
*2
The LAN port is one size larger port than the modular jack of a telephone
line.
LAN
*On some devices, it is indicated as "LAN" on your device.
*2
OFF
7

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis