Troubleshooting - Kodak PPS100 Pro Bedienungsanleitung

Best-use strategy
When recharging devices with KODAK PPS100 Pro, you should take note of the battery indicator.
If you plug in devices that have a high power requirement, the charge level of KODAK PPS100 Pro can
drop quickly and you will not be able to extract the entire 85.8Wh of energy.
On the other hand, if you're charging devices that draw power more slowly (tablet or smartphone),
you will be able to extract close to the full 85.8Wh from KODAK PPS100 Pro. If yor're experiencing
shorter times, you can check the device's power requirement.
When the AC port is not in use, turn it off to save power.
Appropriate temperature usage
Charge protection: KODAK PPS100 Pro can charge your device when the ambient temperature is
between -10 - 40°C. Outside this temperature range, the system automatically stops charging but will
restart once the temperature is back inside the acceptable range.
Discharge protection: KODAK PPS100 Pro can power your devices when the ambient temperature
is between -10 - 40 °C. Outside this temperature range the system automatically stops charging your
device but will restart once the temperature is back inside the acceptable range.
Make sure that the electronic device you are powering works properly prior to use.
The max. power consumption for electronic devices is 80W continuous and 120W peak.
Due to the different types of electric devices, it is possible that they may not operate even if

9. TROUBLESHOOTING

If your devices are not recharging as they should using KODAK PPS100 Pro follow these steps:
1. Ensure the device has been switched on and the battery indicator is showing a remaining charge.
2. Check the battery indicator. If it is at 20% or below, recharge your KODAK PPS100 Pro.
3. Verify your device is suitable for use with the KODAK PPS100 Pro.
a. All KODAK PPS100 Pro output ports have their own max. power. Check the KODAK PPS100 Pro's
technical specifications to ensure your device is compatible.
b. Some devices with rechargeable batteries, like laptops and tablets, may draw more power when in
use. In these cases, power down your device and recharge it.
What should I do if the unit gets wet?
Immediately turn off the unit and wait until you are certain that it is completely dry before turning it back
on. If you are unsure about when it is safe to turn it back on, please contact after sales service.
ATTENTION
their power consumption is less than 120W.
33