Kodak PPS100 Pro Bedienungsanleitung Seite 32

8. USING THE KODAK PPS100 Pro
How to provide power for DC 12V appliances (such as head lamp, fans) with KODAK PPS100 Pro?
Plug your appliances to the DC output port and press power switch button to gain power.
with 5.5mm DC header interface (the diameter of the DC Port of the product is 5.5 mm).
The DC output voltage range is between 12V~16.8V, maximum output current is 10.8A.
DC output voltage drops or increase while battery capacity drops or increase due to
chemical characteristics of the battery. If your appliance is not built-in input voltage stabilizing
If your 12V devices can not work due to input voltage is too high, please read the device manual or
32
This product supports Qualcomm
It supports 5V-12V / 2A max output for smart devices which also
support Qualcomm
The actual output voltage and current depends on the actual smart devices.
It can be obtained by consulting the smart device manufacturer.
Please make sure whether your DC 12V appliance supports charging
Otherwise it is unable to connect with the DC output,
but you can buy the corresponding adapter and connect your appliance with it.
function, it may shutdown when input voltage is too low or too high.
consult the device manufacturer to get the input voltage range of your device.
NOTE
QuickCharge™ 3.0 output.
®
QuickCharge™ 3.0 .
®
5.5mm DC12V for Fan or LED lights
Supports 5.5mm DC 12V car kits with
DC-Cigarette Lighter Adapter, for
vacuum cleaners, inflation pumps,
electric wrenches, fridges, etc.
NOTE
WARNING
or charge car kits via
DC to Cigarette Lighter adaptor