Preparations; Inserting/Removing Grill Plates - Beem B19.002 Bedienungsanleitung

Pro-Multi-Grill 3 in 1 V2

Preparations

Inserting/removing grill plates

NOTE!
► The grill plates are interchangeable.
► Allow the appliance to cool down
before inserting/removing the grill
plates.
Inserting the lower grill plate
(see images A1 and A2)
Push both supporting hooks into the
‹
appropriate recesses at the back of
the lower part of the housing.
Press the grill plate down until it en-
‹
gages audibly.
Removing the lower grill plate
(see image B)
Press the unlocking button (8) and
‹
remove the grill plate.
Inserting the lower grill plate
(see images C1 and C2)
Hang the grill plate onto the lower
‹
supporting hook on the upper part of
the housing.
Press the grill plate down as illustrat-
‹
ed until it engages audibly.
Removing the lower grill plate
(see image D)
Press the unlocking button (3) and
‹
remove the grill plate.
24
Inserting the drip tray
(see image E)
Push the removable drip tray (16)
‹
from the front into the opening on the
back of the lower part of the housing
until it engages.
Setting the gap
(see image F)
The gap between both grill plates can be
set using the spacer and is dependent on
the thickness of the food to be grilled.
Push the spacer (10) to the desired
‹
position so that it lies securely on the
desired level of the rest support (11).
Folding up the lid
(see image G)
The appliance can be used as an open
grill. The lid must be opened back com-
pletely for this purpose. Proceed as fol-
lows:
Push the spacer to the "
‹
position and open the lid at the same
time until it engages.
Locking engages automatically when
‹
closing.
Locking the lid
(see image H)
Push the spacer to the "
‹
Close down the lid (2).
‹
Push the spacer to the "
‹
BEEM - Elements of Lifestyle
EN
"
".
".