Troubleshooting - medi one CMS50D Gebrauchsinformation

English

9. Troubleshooting

Trouble
The SpO
2
and Pulse
Rate can not
be displayed
normally
The SpO
2
and Pulse
Rate are not
displayed
stably
Possible
Reason
1. The finger is
not properly
positioned.
2. The patient's
SpO is too low
2
to be detected.
1. The finger
is not placed
inside deep
enough.
2. The finger
is shaking or
the patient is
moving.
44
Solution
1. Place the
finger properly
and try again.
2. Try again;
Go to a hospi-
tal for a diag-
nosis if you are
sure the device
works all right.
1. Place the
finger properly
and try again.
2. Let the
patient keep
calm.