Manual Store; Favourite Programmes; Other Settings In The Install Menu - Philips 29PT864012 Bedienungsanleitung

Manual store

This menu is used to store the programmes
one at a time.
& Press the
é With the cursor, select the
Manual store
"
System:
or
Western Europe
Europe
(I standard) or
* Except for France (LL' standard), you must select

Favourite programmes

This menu allows you to select the programmes
to be accessed with the
& Press the
é With the cursor, select the
Favourite Progr.

Other settings in the Install menu

& Press the
é
Language :
the menus.
"
Country :
Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your
country does not appear in the list, select ". . . "
'
Auto Store
programmes available in your region. If the
transmitter or cable network sends the
Downloaded from www.Manualslib.com
H
key.
Install
:
Main •
Install •
Language •
Country •
Auto Store •
Manuel Store
Sort • Program No. •
Program •
Fine Tune •
Name •
select (automatic detection*)
Europe
(BG standard),
(DK standard),
United Kingdom
(LL' standard).
France
@ #
P
H
key.
Install
and press ≥.
Main •
Install •
Language •
Country •
Auto Store •
Manuel Store •
Sort •
Favourite Progr.
2 •
Name •
H
key and select the
Install
to change the display language for
to select your country (
: to start automatic search for all
manuals search engine
choice
'
Search :
programme is found, the scanning stops and its
menu then name is displayed (when available). Go to the
next step. If you know the frequency of the
required programme, this can be entered
directly using the
If no picture is found, consult the possible solutions (p. 12).
(
Program No. :
System •
the ≤≥ or
Search •
1, enter
§
Fine Tune :
Store •
adjust using the ≤≥ cursor.
è
Store :
! Repeat steps ' to è for each programme to
Eastern
store.
ç To quit the menus, press
The list of favourite programmes is displayed.
key. The programmes that were stored at
installation will automatically appear on this
menu then list.
" Use the up/down cursor to select the
required programme.
' Use the left/right cursor to add or remove a
programme from the list.
( Run through steps " and ' for each
programme to be added or removed from the
list.
§ To exit, press
automatic sort signal, the programmes will be
menu:
numbered correctly. If this is not the case, you
need to use the Sort menu to renumber the
programmes (see p. 4).
for
GB
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.).
In this case, indicate your choice using the <>
cursor and validate with ≥.To quit or interrupt the
search, press
possible solutions (p. 12).
( To quit the menus, press
.
France
press ≥.The search starts. Once a
0 9
to keys.
enter the required number with
0 9
to keys. Example : program
01
.
if the reception is not satisfactory,
press ≥.The program is stored.
d
.
d
several times.
H
. If no picture is found, consult the
d
.
5