Topcom Wireless Broadband Router WBR 254G
•
Now the setup is complete
•
When all settings are saved a new screen will pop up:
•
The Setup Wizard is completed !
Remark:
•
Next time you go to the router Web page the Setup Wizard will appear again. This can be disabled:
5. CONNECTION STATUS
The WAN connection can be checked in the Status screen on the router Web page.
For PPPoE connection:
- The connection can be disconnected by clicking Disconnect. You can connect by clicking the Connect key
Topcom Wireless Broadband Router WBR 254G
Downloaded from
www.Manualslib.com
- Click Restart to save and restart the router.
- Click Close
- select No and click update
- now the wizard will not appear again when you access the router Web page.
manuals search engine
11