Cleaning The Appliance - KLARBACH VT 36001 ch Gebrauchs- Und Montageanweisung

EN
Setting the fan speeds
Select a fan speed from I to III with
speed level controller (8).
Setting the oscillation
Turn the fan head in the desired
direction with the bracket of the rear
protective grille.
The adjustable tilt angle of the fan
head is max. 85°.

10 Cleaning the appliance

Clean the fan at regular intervals.
Always disconnect the fan from the
mains power supply before cleaning.
RISK OF ELECTRIC
SHOCK!
Never immerse the fan in water for
cleaning.
Do not use steam cleaners for
cleaning.
APPLIANCE DAMAGE!
Improper cleaning can result in
damage to the fan.
Page | 20
1. Remove the front protective
grille.
2. Carefully remove the fan vanes.
Do not drop.
3. Remove oil stains with a damp,
soft cloth and conventional
cleaning agent.
4. Finally wipe dry and polish with a
dry cloth. Never use polish or
corrosive liquids that could
damage paint, metal or plastics.
5. Fit the fan vanes again.
6. Attach the front protective grille
to the rear protective grille and
lock it with the clips.
Repair
• Have defective appliances
repaired only by a qualified
electrician.
• Have a damaged fan mains
power cable repaired only by an
authorised and qualified
electrician to avoid possible
risks.
Unauthorised and unqualified
repairs and improper connection
will void all warranty claims.