Unpacking, Assembling And Setting Up The Appliance; Risk Of Electric Shock - KLARBACH VT 36001 ch Gebrauchs- Und Montageanweisung

EN
• For safety reasons, the mains
power cable must be replaced by
the manufacturer, in his after-
sales service workshop or by a
person with the necessary
qualifications in the event of
damage.
8 Unpacking, assembling
and setting up the
appliance
Take care when opening the
✓
appliance packaging.
Remove the fan from the
✓
packaging.
Check whether the delivery is
✓
complete (see Fig. 1).
Check the fan and all the
✓
individual parts for damage.
If this is the case, do not put the fan
into operation. Please contact After
Sales Service
www.ggv-service.de
APPLIANCE DAMAGE!
If you open the packaging carelessly
with a sharp knife or other pointed
object, the fan can be easily
damaged.
Assembling the appliance
RISK OF ELECTRIC
SHOCK!
The fan must not be connected to
the mains power supply during
installation.
Page | 18
RISK OF INJURY!
Never operate the appliance without
the protective grilles. The protective
grilles must be tightly fastened
together at all times during
operation.
RISK OF INJURY!
Take care when fitting the rubber
feet – sharp edges on the cross
stand.
IMPORTANT
Observe the sequence of steps
described to ensure proper
installation.